Double Glazing Lock Repairs
Having quality locks on your doors and windows will stop burglars from getting into your home. They aren't likely to break glass or try to get through windows that are open.
Certain double glazing owners however, have encountered issues with their door or window lock following the installation. These problems can often be resolved without the need to replace double glazing.
Broken or faulty locks
If your uPVC window or door lock is damaged or broken, then a locksmith can fix it. They can repair hinges, striker plate and locks for double-glazing. They can also move the cylinder to fix any misalignment which could be causing your handle to operate correctly.
If the key fits in the lock but it won't turn or is difficult to insert, the mechanism might be locked up. Grease or dirt can be trapped in the mechanism. If this is the case it is possible for the lock to be cleaned and lubricated. Make use of a dry lubricant, like graphite or Teflon, not oil, because oil can attract dirt, and cause it to stick to the inside mechanism. After lubricating, insert the key into the lock and turn it. The lubricant must be absorbed into the mechanism, and the lock should spin easily.
Loose screws within the lock mechanism are a different cause of a faulty lock. They can loosen and break off or fall out completely and stop the lock from functioning properly. These screws can be tightened using a screwdriver, but you must be careful not to overtighten them. This can damage the internal components.
A damaged lock can be dangerous for you and your family. This is especially relevant if you have young children. They could easily open the door without your knowledge and gain access to your home. If you're worried about the possibility that this might occur, a professional locksmith can help you secure the double-glazed doors.
Misty Glaze are a professional uPVC and double glazing business in Lancing, who can repair any type of defective and broken mechanisms such as handles, cylinders, handles and lock systems for both uPVC windows and doors. We can also alter your uPVC or double glazing locking system to meet your particular requirements, meaning that in a lot of cases replacement windows and doors are not necessary.
Handles that are damaged or broken
As part of their overall security package most double-glazed windows feature a multipoint lock. This is a great choice for those who are concerned about opportunistic thieves looking for ways to gain access to your home. It's also worth asking your locksmith about anti-lift blocks, these can be fitted in addition to the locks already in place and help keep your window firmly locked in a closed position.
Handle locks can be damaged or fail. They are the first part that a criminal will use to force open your window. Luckily, the good news is that this is one of the most straightforward parts to fix.
Modern uPVC handles and aluminium handles are equipped with a multi-point locking mechanism known as Espagnolette, which is designed to prevent forced entry. This security upgrade is available as an option with new uPVC windows. Older style uPVC and aluminium handles can be upgraded to lock systems that shoot bolts and again as an additional option on double-glazed window installations.
If a handle is damaged, it's crucial to get it repaired as quickly as possible. The damaged handles could stop the window from closing properly and allow drafts to enter. It could be a weakness that burglars with a plethora of opportunities could exploit, therefore putting your belongings and family at risk of being taken.
The process of fixing the failed mechanism starts with gaining access to the window frame and removing the damaged handle. The gearbox can then be accessed to determine the kind of gearbox used to open the handle. This will allow a replacement that matches the profile and the internal window frame mechanisms.
Once the mechanism is replaced the handle can be fixed using the original screws - but we would recommend replacing them with more long screws since this will provide the most secure fit. The final step is to apply a coating of clear sealant in order to protect the handle from further corrosion. Once you've completed this step the window should be functioning again at a fraction the cost of replacing it.
Broken or Faulty Hinges
If your windows don't close properly, you may suffer from draughts or an affliction of your home's security and an increased risk of damp or water damage. Window hinges that break or become faulty are a common problem and can be fixed easily.
If your windows made of uPVC won't open or close and close, it's likely the hinges require to be repaired or replaced. While many window companies require you to purchase a new window unit in order to fix this simple problem We're able to repair the hinges that are damaged and save you money.
Window hinges can be damaged by repeated use, or weakening over time due to corrosion. In the event of a damaged hinge, it is important to take steps to prevent further damage by being careful not to make the window swing to open or close.
You can locate the appropriate parts for your hinge by identifying its type. Maco, Mila and Roto are all brands of window hinges. Get advice from a professional before buying parts that do not fit into your existing hardware. This could cause more damage.
Faulty hinges are a major problem for uPVC windows and doors. They can be an important source of noise, and can also permit water to get into your windows.
To resolve this issue, first make sure whether the pin barrel on both sides of the hinge is aligned. If it's not then tap the headpin using a hammer in order to create a slight bend in the hinge barrel. This will help keep the pin in place. Ask a second person to hold the door while you remove the hinges and hinge screws from both the doorjamb and the door. Replace the hinges and attach screws using glue. Finally fix the hinges using clamps or weights while the glue sets.
Once you have repaired your hinges, you are able to install the door again. You can also reattach the handle. It is recommended to replace the screws with the same length of dowels as the original screw so that they align with each the other.
Broken or Faulty Glass
uPVC Windows can become damaged over time, even though they are extremely effective in keeping cold out and retaining warmth. This can include broken or damaged glass and faulty locks. This is a problem that can be very expensive if neglected. double glazing repair near me can detract from the appearance of your home and may lead to a loss of insulation, so it is essential to fix any damage as soon as possible.
You can fix your cracked glass by yourself if your have the right tools and techniques. Make sure the area around the broken glass is free of debris so that any pieces of glass do not cause injuries or trip hazards. Remove any broken glass pieces and dispose of them in a proper way. Then, place masking tape to the entire area to stop shards from scattering and sticking to your skin when you move them. Making sure the glass pane is fitted prior to adhering it to the wall is an ideal option if you are dealing with a window that has two panes. This will ensure you have enough space to complete your project.
Before applying the glue, wipe the surface of the broken frame and glass with a an unclean, dry cloth. Follow the instructions for application and curing time that can differ from product to product. You may have to clamp the broken glass with clamps made of lightweight materials designed to hold delicate materials, depending on the angle.
After the adhesive has cured, carefully install the glass inside the window frame. Make sure it is flush with the frame edge and that there aren't any gaps between the glass sash and the frame. Be careful not to bend the window while it's installed, as this could weaken the seal and lead to condensation and water infiltration.
Contact a professional glazier, like O'Brien(r), to arrange a replacement if your glass window has been completely broken. It's crucial to act fast when you notice broken glass.